Originally Posted by
hoyt1967
Yes, make sure the "top hat" inserts are in the right place, I believe there is a long and short and they go in a specific way. Let us know what you find.
I may have figured it out with the help of Tekno tech support. I drilled holes in the top of my shock caps for vent setup and left a little flashing on every one. The pressure of the oil under the bladder pushed it up under the cap and was cut by this flashing. The shape of the cut matched the drilled hole flashing. So I'm cleaning up the flashing with a large drill bit and hopefully that should fix it. I'll post back after some track time.
Oh by the way the shaft end with lock nut doesn't come anywhere near the bladder at full depth so that was not pushing on the bladder like I thought. Also my shock shafts are correct front and back. Not reversed. Thanks for all the help and tips.