Parts Required to Fully Convert and 8ight 3.0 to 8ight E 3.0
8ight E 3.0
LOSA3560 Spur gear and diff seal plate
TLR242002 Front Center Drive Shaft
TLR242009 Rear Center Drive Shaft
TLR241001 Chassis Guard
TLR241002 Battery Tray
TLR241006 Chassis
TLR241004 Servo and Receiver Box
TLR242006 Motor Mount
TLR242007 Motor mount/diff mount
TLR242008 Diff bushing ring not included with the nitro version
TLR241003 Front and Rear Chassis Brace
Here is a list i compile of all the parts that would be required to be replaced on the 8ight 3.0 to 100% convert it to an E version. There are some parts that can be recycled from the nitro into the electric. I believe one of the center diff mounts is reused and the front center drive shaft on the nitro is the same as the rear center drive shaft.
When I priced everything out on amain it would have cost about $160 to do the conversion. I only think it is worth it if there is some competitive advantage over doing the simple conversion.
Please not this does not cover the misc screws you would need. If you took the time you could probably cut the price down to 120-130 if you shop on ebay or can get some deals.