I had a great run at iic. Chassis was excellent from the time we arrived through the end. We had a great showing of Rev 8's in the A main all with some wildly different setups but all fast and contenders.
here is my setup from Vegas
Carbon Chassis, inline
Front .20 asc spring, 2mm droop (lift up on front end)
Camber 0, toe 0, caster 3 deg, 3d printed upper arms, 5 deg reactive block.
center spring asc blue, 30et shock oil (prime shock) 2mm center pivot droop
.20 rear side springs. touch chassis at ride ht adjust tweak. orange tube lube.
tires cut to 40.25, front sidewall CA'd,
Andrew Mowery