R/C Tech Forums - View Single Post - Team Associated RC10 B5m Mid-Motor Thread
Old 10-09-2016, 08:20 AM
  #20771  
tylem28
Tech Regular
iTrader: (17)
 
Join Date: Sep 2016
Location: Indiana
Posts: 462
Trader Rating: 17 (100%+)
Default

Needing some help getting a buggy to turn better on a small carpet track. Below is what I have and needing some help as to what I can do to improve turning. Thanks!

BM5
Savox TG Servo (.07) cant remember the model #
Aluminum Bellcrack
Using DX4C Controller (stock settings 100% Steering L/F, and have tried up to 150% Steering L/F, Haven't messed with Expo settings (not sure what to set at or change)
Springs (Stock) would going to a softer or harder spring help? Where would you put the compression for the spring for more steering (lower or higher on the tower? (close to the top or closer to the track/)
Battery Location help? (I am using a short pack and have it as far forward as possible)

I am running Electrons for tires front and rear. I have tried Slicks (these seem to have to much grip and makes it harder to turn in corners)

What should I change on my radio (DX4C)
Anything I can add / change on the buggy to improve steering?
tylem28 is offline