CE. Bought cheap as a parts car and just grew to love it. Kit setup, with the exception the rear links are on the outer ballstud mount. Orig owner stripped the inner one. Only changes I've made are moving the shocks to the rear. Moved shock to inner hole on rear tower. 2mm shims on hub. 2mm shims on ballstud mount and 2mm shims on hubs. 3dot 2dot 30/27.5 f/r. 4 degrees toe -2 degrees anti squat (middle f/r)
Originally Posted by
Socket
This is on the CE, correct?
I'd start by setting my slipper perfectly, run a ball diff, and then work from there. Limiters can have an impact on mid corner, however, I wouldn't go there yet. Do you have a setup sheet of where you're at right now?