R/C Tech Forums - View Single Post - Team Associated SC5M Thread
View Single Post
Old 03-17-2016, 03:47 AM
  #1438  
Newbie Rc Guy
Tech Apprentice
iTrader: (2)
 
Join Date: Sep 2014
Posts: 94
Trader Rating: 2 (100%+)
Default

Originally Posted by david85williams
Hi All,

I'm new to the forum. I'm after some setup help with my SC5m running in the UK on high grip astro turf. Really struggling to find setup sheets for astro or carpet. Im struggling with lots of body roll resulting in grip roll. I had added stiffer front springs (AE Grey), raised front and rear roll centres, and laid the front shocks down as much as possible (inside hole on the tower, and outside hole on the suspension arm).

Any help would be much appreciated.

David
I've been running on similar surface. I was running 4 limiters in all 4 shocks, 45 wt grey truck Springs and a front sway bar up front from a sc10, no shims on front shock tower. 40 wt with white truck Springs in the the rear. 4mm shims on rear aluminum hubs, no shims in the center. Slam the truck to the ground. I was running worn dboot nanobytes on front and a fresh pair on the rear in A compound.
Newbie Rc Guy is offline