Originally Posted by Davidka

Hi all,
For battery position, are most of you omitting the rear adjustable brace on the battery hold-down strap in favor of a foam block between the battery and waterfall? I am finding the rear most position with the brace in place still results in the battery being ~15mm from the waterfall and I'm seeing setups calling for 5mm from waterfall.

Also, build tip: I found several of the screw holes into plastic very tight, ie. screw squeaking as I tightened it. I found a dab of the black grease to be helpful with these. It's not something I've done often before.

Looking forward to running it. I'm starting with a modified kit setup that emulates the Dustin Evans setup on the site, since that was run at my regular track.