R/C Tech Forums - View Single Post - Kyosho Ultima RB6 & RB6.6 Car Thread
Thread: Kyosho Ultima RB6 & RB6.6 Car Thread
View Single Post
Old 11-30-2015, 10:06 AM
  #12805  
K_King
Tech Elite
iTrader: (47)
 
K_King's Avatar
 
Join Date: Jul 2006
Location: San Diego, CA
Posts: 4,234
Trader Rating: 47 (100%+)
Default
Originally Posted by 13Maschine
@K.King: what's the part number for the 3 line axles you mention? How do you have them shimmed? I have a new 2015B RB6 and I'm wondering which axles it came with. I've recently started using the AVID axles as they let me use different types of wheels but I'm not opposed to trying the 3 line for width adjustments. Have you measured the rear width at the wheels for your setup? Speaking of what wheels do you prefer?

Thanks in Advance!
UM510 is the part number. I have it in the notes section as well.

I use the standard thin shim on the inside of the hub and then it's a 1.5 or 2mm external shim between the hub and the hex. LA253GM is the part for that.

When I run Cin and 3 line spaced out the car is right at the legal width or just slightly narrower.

I've always run Kyosho. I don't really trust other wheels with slightly different offsets.
K_King is offline  
Reply