Originally Posted by
one8updragracer
Forgot to mention that I was running 8 hole delrin pistons because that was what I had in my box. With 450f and 350r oils I'll try higher oils with weaker springs and see what happens. I also have some csi blues in my box I'd like to try.
And yes it was a crazy handful to drive.
Per Teknorc's recommendation earlier in this thread put this setup in and run it. I've ran it outdoors on a blown-out dirt track and on a clay track with no changes and it was pretty dialed. I haven't ran the 4 hole pistons but I did run 6x1.6 with this setup
http://www.teknorc.com/tekno5/wp-con...Lewis_SDRC.pdf
On the ride height issue you might make sure the upper shock mount nut on the shock side isn't all the way tightened down, I've seen it hold the shock both up and down in the stroke if the shock can't move freely. Also check to make sure the grub screws in the sway bar pivots aren't to tight causing it to act more like a torsion bar than a sway bar.