Originally Posted by
micholix
If you run v2 front arms and v1 shocks, please be carefull and watch your uptravel top end, because of the new strait arms, they shortend the shock shaft, by 1.5 mm and the shock body by 1.5 mm, too!
Edit: and they us new offset spring retainers now, front and rear.
Just remove the rubber stopper if you use v1 shocks with v2 arms. The loss of 1.5mm in clearance can be gained with the removal of the stopper which is about 1.5mm anyways. I also run shock boots, and there is a bit of rubber there for cushioning the up travel . And the piston doesn't hit the shock cap.