Originally Posted by
AccessRacer
I am going to try 6x 1.5 pistons with 37.5 and Yellow Springs in the front and 32.5 with Yellow Springs in the rear and differentials set at 775. I race on an outdoor hard packed clay track in dry conditions.
Do you have smaller jumps at your track where you don't need a lot of pack for landings? Is your track smooth or bumpy? it seems like most people use stiffer springs and heavier weight oil in the front. What is the purpose of going stiffer up front? Are you using the stock 2.6mm sway bar up front?
On Ryan Lutz setup sheet he is using 550 oil for the front and 450 for the back. Is this weight or CST because I know that CST and weight are not the same? I assume it is 55 wt and 45 wt?
Sorry for all of the questions, just trying to learn and get faster at my track