Originally Posted by
Jakeracer81
How are you guys getting the front end stiff enough? I have 4.2 springs, 1.4 Pistons, sway bar, and 40 wt oil in the front. It still rolls over really hard on the front. I race on tight, high bite outdoors and high bite indoor.
Thanks
I have personally never go over the Serpent Green Spring rate which is a 3.5 anymore. I sometimes run the front sway from serpent but I haven't ran it since Dec. I've tried stiffer front springs multiple times, even on very high bite, and it was always slower.
If you are looking for a bit more rear grip and more even roll, I highly suggest the buggy rear hubs. You have to use a rotary tool a bit on them to get the axles to fit but they are worth trying. The part number is 500114.