Front- vrp 3x1.4 pistons 32.5 wt oil. Xgear white. Stroke 21.75mm Middle middle tower and arm. Camber link middle on bulkhead inside on hub. 1mm washer. Spindles down. 25 and 5 for kick up caster. 23.5 mm ride height. 4mm akerman. 2mm spaced down on steering rack. No bump steer washers
Rear- vrp 1.6x2 pistons 30 wt. Xgear white stroke 27.5mm. Inside on tower inside on arm. Camber link middle on bulkhead center on hub. 1mm on bulkhead 2mm on hub. Arms center hubs center. 3deg toe in 1 deg anti squat. Shim under front rear holder. None under rear rear. 23mm ride height
Misc
bmax2 driveshaft
Bmax4 rear arms if little to no dust
yz2 arms if getting dusty
25g weight under battery
shorty back
brass rear front suspension holder
15 gr in front of front rear holder
No rear motor plate brace
trimmed waterfall
4 center rear side pod screws loosed 1 turn from tight