R/C Tech Forums - View Single Post - Team Associated T5M Discussion
Thread: Team Associated T5M Discussion
View Single Post
Old 04-05-2015, 11:35 AM
  #1076  
1/4milecrazy
Tech Master
iTrader: (5)
 
1/4milecrazy's Avatar
 
Join Date: Oct 2008
Location: North Jersey
Posts: 1,187
Trader Rating: 5 (100%+)
Default
Originally Posted by aeRayls
Umm yeah, I would never do this either on the truck. 3mm per side is HUGE!

I couple years ago at Nats at WCRC when we were all in the tech line. Brent and the rest of us discovered that the trucks were already a lot narrower in the rear than the max roar width.

I have not measured the width of the T5 yet. Basically I'll never change it anyway, especially not that much! Too narrow and the stability sucks and too wide and the grip goes away.

Using the buggy hexes to narrower it by 1.5mm per side is the Most I'd ever consider.
Yeah it is, but maybe huge is good. You never know until you try. Cant be afraid to step out of the box. That is what practice days for.
1/4milecrazy is offline  
Reply