Originally Posted by
RENOV8R
I'm sure the Exotek is a good upgrade but make sure you have a good look and make sure there isn't a reason the original one stripped in the first place. I've had mine a few months and the stock spur is still fine. I think with all the talk about the stock ones being a little out of round, some are leaving the mesh a little looser than it should be.
I found the problem with why i stripped the original, it was due to my motor coming loose, i think I've over tightened the motor mount and may have stripped it cause it just won't tighten up, just as it starts to get tight it gets to that point and then just spins and becomes loose.