Originally Posted by
valk
one of the downsides to the newer xray style mounts for sure.. ive never had this problem with the old style mount. i use .5 flat washers on the screw head side of the motor which seems to help a little bit.
one element im going to incorporate on my solidworks model is a static motor position with adjustable layshaft instead.
The problem with washers on the R2, is that the motor mount has a little channel that the button head screws sit in. the channel is not much wider than the button head itself.
I'm trying to source some star head 3mm washers for this very reason. Don't know if these will work or not?
http://www.amain.com/team-associated...her-20/p260838