Originally Posted by
dpcardoza
Question for those running the v2 rear hubs. Are you guys running the inserts and smaller bearings or just running the larger bearings?
I ran the smaller bearings until I was able to get my hands on the larger bearing. For me, the larger bearing seemed to last longer that is why I went with that size.
Originally Posted by
rosko
Just order the rb6 going to b running mm on indoor med to high bite clay. R the stock piston worth trying?
If you can I would get
1.6mm x 2 and the
1.4mm x 3 hole pistons when you can. You can use the kit pistons but I think you will find the car not having enough pack in the shocks. You could try and compromise with heavier oil but even that has some drawbacks.