Originally Posted by
Teodoras
Try boost activation by "full throttle + rpm" it will let you to select from how much rpm boost will activate in stages
Also keep in mind that if you set the turbo activation by full thottle + rpm you need to set the right rpm else you will not see anything. EG: if you are running a 13.5t and set the turbo activation to 30000rpm then you will not engage turbo.
Personally I prefer to activate turbo on full throttle only so i do not need to do the math
You still will need to set your boost rpm range though.
What motor and rollout are you running? Maybe we can point you in the right direction with the settings.
BD