R/C Tech Forums - View Single Post - Yokomo F1 YRF
Thread: Yokomo F1 YRF
View Single Post
Old 12-07-2014, 11:53 AM
  #157  
sbd
Tech Regular
 
Join Date: Nov 2014
Posts: 378
Default

Originally Posted by dctrfrz
Well, the rear ride height is controlled with the eccentric spacers as you know, I don't know how else to do it, and I trust you are using the largest offset? Maybe someone knows another way but I think that's it. Is 5.6mm rear height measuring with the front tires on or off?

5.6mm may be a good ride height depending on the track. What track surface are you running on?

Is there any way you can post side and top images showing your resting ride height with your measurement tool in position? Then take the rear wheels off and do another side image.
Hi,
Yes, of course with the front wheels on. This is for carpet track so 4 mm is appropriate height. Now, the issue is the rear Ride tires are a bit larger diameter. I have set the front and middle to 4.2 mm. The rear of the pot comes at 5.6 mm. Thinking about the rear end kinematics, it looks small slope of the pod should not have adverse effect on handling. Or should it? I dont know.
sbd is offline