Hi,
Could you guys advice me how to lower the yrf rear pod height. I have the 2 mm bearing inserts with the hole up and yet the pod ride height is 5.6 mm. This is with RIDE R1 rear tires. Looking at the Yokomo setup sheets, it seems the 2mm insert is the largest eccentricity one.
I thought I will lower the main plate to level at 4mm. This would raise the rear of the pod up to something above 6.3 mm. Thus, will have lower CG for the main plate and slightly lower for the rear pod as the CG of the pod is in front of the rear shaft. What impact the fact the main plate is not leveled with the pod could have on handling?