Hey EDWARD2003,
Track Looks nice!!! Try to be a little smoother on the steering input since your on asphalt. And through the chicane You can actually straight line it. Just run about an inch of the curb as your guide and run straight through
Other than that the Car/Driver looks nice.
Originally Posted by
EDWARD2003
Kyosho Plasma revisited... I'll be honest I kinda gave up on this chassis. I couldn't figure out why it was handling the way I wanted it to. Lone behold it was my lack of knowledge of 1/12th setup that was the main factor. Obviously.
Ever since switching over to R12C3, I've learned a lot and still learning. So, all the knowledge I've gathered and put into my Plasma Ra. I went back to the chassis and looked over everything... First off...This will sound embarrassing, I thought all the shims in the bag were required to make the track width 172 and 168.. So I used them all... Boy was I wrong.. Little did I know, my track width front and rear was out, and I mean way out. The rear was 182 mm and the front 174.. Talk about dump truck.
I removed all the spacers with 172 mm rear and 166 mm front.
Afterwards I did a test run. What difference it made. It drove so much better, but it still needs more work.
Check out how she handles now. I might add an additional 1 mm spacer to widen the front a little to help with stability.
https://www.youtube.com/watch?v=1gFuFbG_eCo