R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 11-21-2014, 01:05 PM
  #41661  
Racermac73
Tech Elite
iTrader: (3)
 
Join Date: Jan 2013
Location: Virginia
Posts: 2,136
Trader Rating: 3 (100%+)
Default

Originally Posted by ccm399
Ok, so I changed some settings in the ESC and they helped but have not eliminated the issue. Basically I set the throttle minimum to max based on a FB post from Randy Pike about how to properly adjust this setting. Mine worked out to be best at the max setting. This has helped some but the other SPEC cars are still much faster at the tone.

I plan to try the 120% radio trick tomorrow. I have set the ESC with the Radio at 100% and now I will turn it up to 120% on the throttle end point. I would think expo would do the same or similar thing but maybe not. Hopefully it will help. If not I will have to get a new ESC.

Thanks for all your input.

Chris
I had the same problem with a actinium motor in 17.5.. Turned minimum drive frequency up, ect.ect and nothing fixed it. Put the motor on a motolyser with a 1s pack and found the timing was simply to high. 47° on the motolyser runs great but when it was at 49° it was just to high causing it to cog, be slow and occasionally required a push from a dead stop just to get it moving.
Racermac73 is offline