Originally Posted by Nat Maniac

Weak as brakes.

Hoping someone could help me with a very unusual problem.

After installing a new 6.5t motor the other night (indoor carpet) I found that I had minimal braking power. I mean that near the end of the straight away after applying full brakes it would take about about 3-5 meters (9-15ft) to slow down enough to turn the corner. (had a few run-ins with the wall that night)

I have completed the following troubleshooting but still have the same problem.

- Re calibrated esc multiple times
- Reset all data on my TX then re calibrated esc
- Turned brakes EXP up to max
- Replaced lrp fwt esc with brand new novak gt3 esc
- Replaced motor with 8.5t used only a few times
- Replaced sensor cable with new cable
- Tested my TX with my B44.2 which has exact same esc and motor...brakes are LEATHAL as expected.

And finally clutching at straws..

- Tightened slipper all the way
- Loosened slipper all the way

After doing all this I still have very minimal brakes and its driving me crazy. Im about to pull apart my diff as a last resort but I cant imagine that has anything to do with braking power..

Anyway I thought i'd just ask everyone for some advice in in case im missing something obvious.

Thanks v much for your help