Originally Posted by
RC Juice
My current setup is AE red fronts with 37.5 and 2x1.6, and AE white rears with 32.5 and 2x1.7. When I first got the car, I got is used and ran it as it was to get a baseline. The thing drove like a washboard and was al lover the place, when I got it home I took it apart and found that he had modded some stock pistons by plugging off 2 holes in each and was essentially running 2x1.2 fronts and 2x1.4 rears. The changes I made helped smooth out the car a lot, our track is very bumpy.
Should I stiffen up both the front springs and oil you think?
when you said all over the place, I figured you meant twitchy. Not bouncing all over. I run indoor on a pretty bumpy track. I also use AE red/white springs, but I am running 1.3x4 pistons front and rear. My car is pretty planted over the bumps. otherwise,m my setup was pretty much box stock. I just slapped on Ty's reedy setup, but with 1.3x4 pistons with 42.5/37.5 oils. Since i dont have 2 hole pistons yet.