R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 09-22-2014, 05:01 PM
  #41401  
Skiddins
Tech Elite
 
Skiddins's Avatar
 
Join Date: Feb 2006
Location: Windsor, UK
Posts: 4,952
Default

Originally Posted by andrewdoherty
I'd like to hear others thoughts about the topic of wobbly wheels as well. Especially if the truer has been eliminated as a problem.
From what I've been told, it's the tightening of the screws into the rear wheels that usually causes it.
If the screws aren't evenly tight etc it can 'pinch' the plastic of the rim which can distort it slightly.

Zen Racing developed a rear axle to remove this problem. Dave Spashett helped design it.
The hubs have small 'lugs' that fit through the holes on the wheels and M2.5 screws that attach the wheels;



A review of it;
http://www.thercracer.com/2014/01/re...tive-lock.html
Skiddins is offline