R/C Tech Forums - View Single Post - The Speed Passion Thread

09-16-2014, 07:31 AM

#12690

Electr0n

Tech Initiate

Join Date: May 2014

Location: Netherlands

Posts: 49

Trader Rating: 0

Quote:

Originally Posted by Mr_RCGuy

I have a Reventon R and 10.5 sensored motor combo. I have the LED card and software running properly.

The problem is that I have no forward. I only have reverse. The reverse is the full throttle that should be for forward. I have swapped the rev on the transmitter, but it just changes it on the transmitter, not the car. I have tried recalibrating the esc countless times.

A,B,C wires are correct. SP thinks it is my RTR Transmitter and Receiver, however it works fine with my Hobbywing (which does let you change motor rotation).

Any ideas? I am out.

Thanks.

Which car ?

I once had a shaft driven car with the diffs mounted opposite what is normal for most cars. Most sensored esc motor combinations will not work in these cars.

Andre

Reply