Originally Posted by
hacker07
The only thing that will affect ride height is how heavy the truck is and the pre-load collar. So, different motors or batteries, etc.
This is of course you dont have o-rings sticking or rod ends binding or your lower screws(the two really long ones) screwed in too tight pinching the arms(this is very common). When those screws are too tight, the arms are literally pinched between the two toe blocks and do not move freely. Your arms should move back and forth on the hinge pin ever so slightly.
Hey Ryan I found a good little fix for the pinched arms issue. Some of the MIP Bypass Tuning valves work awesome as a little spacer that goes inbetween the diff case and the A (front) and D (rear) hinge pin blocks. And presto, no longer do you have to worry about over tightening the screws.
http://miponline.com/store/mip12129.html
They are easily modified and come in different thicknesses if needed.
