Originally Posted by
Integra
I'm personally not a fan of relying on 2 sided tape or shoe goo and also don't like the fact it's "solid" on the chassis so for my e buggy and SCTE I make a small 150mmx40mm CF plate, drill and counter the chassis and mount on O-rings. Capped off with Velcro and zip ties to ensure the esc has some wiggle and Can't come dislodged.
I did something similar but instead or making my own plate, I used a Tekno V4 ESC tray. I reduced the height of mounting pads so the RX8 fit under the body with just a little taken off a corner of the case.