Originally Posted by kenny lutz

I went back to the small ends with flat arms. right now my setup is 42.5 t front 32.5 rear 2 hole 1.6 pistons. hubs middle in the rear. orange front gold rear springs. tight front diff medium tight rear. 2 mm inside rear at bulkhead all the way inside and 3rd farthest hole on the hub. pink sway bar front and rear. I'm going to go to 37.5 front 30 rear as the car is a little stiff but feel really good overall. its starting to come around and drive very consistent and easy to drive. I'm c in on the rear front hanger and rear rear f out. then c out in the front front and rear. this is rear motor shorty with esc in the front. now I'm going to try servo transponder and receiver all on the same side with the motor and esc on the left with the esc in the rear to see what it does to the handling. seems to add a little more weight to the rear so should plant the car more but think it might be to much possibly.