R/C Tech Forums - View Single Post - Turnigy TrackStar Motors
View Single Post
Old 08-01-2014, 07:31 AM
  #400  
nf_ekt
Tech Elite
iTrader: (115)
 
nf_ekt's Avatar
 
Join Date: Aug 2005
Location: 22 Acacia Avenue
Posts: 4,647
Trader Rating: 115 (100%+)
Default

Originally Posted by billdelong
Not sure if this was already explained, but info on the OP is rather limited.

I recently pulled the rotor out of my Trackstar motor and found it to be roughly 14% larger than the rotor that came with my Novak Vulcan motor:

Turnigy (Black): 12.5 x 28.4
Novak (Silver):12.3 x 25.3



I also found that the stator could be swapped out and was able to fit the Novak stator in my TrackStar just fine, which can provide a nice tuning option:



Has anyone been able to confirm if the Reedy Sonic rotors will fit the TrackStar motors?

So you have ran the Novak stator in the TS can and it worked well? If so, that's pretty cool. You can basically make a brand new "Novak" and save some money over the price of buying a %100 Novak motor. I ordered one of these for USGT in 21.5, it's good to know that if the class doesn't take off I can get a Novak stator cheap and use it somewhere else, vs. it being a useless item in the pitbox.
nf_ekt is offline