Originally Posted by
Rockin G
So you are saying half a turn 5 times? Which equals 2.5 turns? It used to shift fine at 5.5 turns. The manual says 5 1/2 turns. Never heard of writing it the way you mentioned. Yours shifts at 2.5 turns?
You are reading it correct. 5 full turns plus another half. I usually start at 6 full turns out from flush when I first install a new 2 speed.
Its good to take the 2 speed springs and exercise them with a pair of pliers a few times before installing them. The stock 2 speed springs seem to be pretty tough so this helps soften them up.