R/C Tech Forums - View Single Post - R1 Brushless Motors (Roar approved) 17.5,21.5 & 13.5
Old 06-19-2014, 09:22 AM
  #194  
CristianTabush
Tech Elite
iTrader: (13)
 
CristianTabush's Avatar
 
Join Date: Oct 2002
Location: Houston
Posts: 3,165
Trader Rating: 13 (100%+)
Default

3.7 sounds to high me. I would start around 4.2 with 40 deg of timing and adjust from there. Temp after 3 minutes and gear down 3 teeth temp again and then gear up 3 teeth. Always keep an eye on temps, anything under 180 is fine, but on smaller tracks with a fan, you should not be getting much higher than 165 at optimal ratios.
CristianTabush is offline