R/C Tech Forums - View Single Post - Team Associated RC10 B5m Mid-Motor & Rear Motor Thread
Thread: Team Associated RC10 B5m Mid-Motor & Rear Motor Thread
View Single Post
Old 06-09-2014, 12:12 PM
  #5121  
rigor
Tech Master
iTrader: (44)
 
rigor's Avatar
 
Join Date: Mar 2012
Location: Orange County, CA
Posts: 1,610
Trader Rating: 44 (100%+)
Default
Originally Posted by darbula
Hi, the order of the plastic black spacers & the seal\rings are the same to the standard diagram with the red standard seal\rings....

The low friction rings are too small (external diameter) & and too big (internal diameter) for sealing the shock cartdridge...

When i make the shock for 0 rebound (in compression moment) the seal\ring cartdridge aspirate a lot of air, and in expansion moment the seal\rings not sealing the internal Oil....



HELP ME!!
Sounds like someone didn't put their shocks together correctly, or very well. The X-rings are very good. Take your time building, make sure everything is facing the correct way, and coat in oil / green slime during assembly. My shocks don't weep at all with X-rings.
rigor is offline  
Reply