Originally Posted by
Speedychris22
I'm waiting for Jason to fill out a sheet but u might want to watch his vid about the rb6 review. It showed how he was able to get more flex in the chassis.
So far I know he's running 1mm shims under all ball studs. Middle hole in front block. I'm assuming 25 deg caster, shocks he's running 4x1.3 32 f 30 rear
I'm wondering about limiters in shocks as we'll shock end length and the length of the shocks? Jason help us out. The rear I'm wondering which shims he's using for anti squat
I've seen his review and i did the mod to the bulkhead brace. We run on totally different track conditions though. So his setup might not be ideal for the track i run on. It has some sand in it, so traction will be relatively low for quite sometime.