Originally Posted by ViperZ

If we were closer I would certainly be up for that

I have a similar circle cutter made by Olfa, and they work great on bodes with round symmetrical wheel cut outs. I have only used it on 3 bodies since, but it does work well. Unfortunately the E30 M3's wheel cut outs are not fully round.


These are the 2 bodies I have used the circle cutter on with good results.

Sweep 1/8 PL1. I used it on the back, and actually it was perfect in re cutting again to in large the cut out. I just taped the body down to a piece of wood, sized the cutting compass up, once I found center and cut it bigger. It worked very well.



Proline Ford Focus 1/8