Originally Posted by
wheelz
the 3mm offset wheels are modeled for the foam (pit) style tires. I think only tamiya stock wheels and perhaps ride wheels may work with the stock tamiya rubber.
Typically you want the chassis level front to rear at ride height. if the car is too low, the chassis will be bent in the shape of a "V". if the center is too high it will invert and be "^". You can set the front ride height where you want it and then adjust the center shock up or down to make the rest of the car level.
Thanks Aaron! and thanks for your help at tamiya as well, with my diff and front tire questions
Any chance you could post your complete setup from the Speedtech race?