R/C Tech Forums - View Single Post - Xray XB4 thread
Thread: Xray XB4 thread
View Single Post
Old 04-27-2014, 10:39 PM
  #4670  
elex300
Tech Elite
iTrader: (110)
 
elex300's Avatar
 
Join Date: Oct 2011
Location: Florida
Posts: 4,442
Trader Rating: 110 (100%+)
Default

Originally Posted by suzukipro
I was happy with my new XB4 on its maiden voyage on an indoor track this past Sat, but struggled with the rear end getting loose under full throttle (RSX / 6.5 Motor). I have everything turned down as much as possible on the ESC and even backed out a little expo on the RX throttle and it's still getting loose and crazy fast . I started with 20/81 gearing and went up to 22/81 hoping to take some of the low end edge away, but it didn't. With this all said I managed to pull the win at my local track and had the fastest lap time of the day in over all other classes. Anyone else have a similar issue and tame it?

Thanks,
Originally Posted by Team Pink
I use to have the same issue when my rear hubs were all the way back on the arm. Centering them made a huge difference with forward bite.
That was what I was struggling with the most. I went to the short wheelbase,removed the shock limiters,and removed all the flex screws on the bottom of the chassis. This locked it down for me.
elex300 is offline