Originally Posted by
NickGroves
Hopefully someone can give me some pointers/advice here... all shocks are the same eye to eye, ive backed out the droop screws and disconnected the sway bars, and the chassis in ballanced left to right. But for some reason im getting a half millimeter difference from left to right with the shock collars set at the same setting left to right. Left front and rear read 6mm and right front and rear read 5.5mm. The chassis sits flat on the table.
I would also check the belt tension and as noted springs. Not sure if you own a hudy tweak station but I wouldn't mess with any other stuff. That's the best method.