Originally posted by bashbrook
I recently acquired a 12L3 in a trade and I am having a devil of a time getting the spur and pinion on. I am down to a 75 or 72 spur gear and still can't get a pinion on the motor. There is not enough room with nut on the tbar preventing me from moving the motor any further away. My offset is a 2 but my ride height is a little low from what I have been reading at 3.5. Do I need a different offset, remove the nut on the tbar, what do I need to do?
Help!
Brad
I assume you are using 48 pitch gears, with a 75 I have used up to a 17T pinion but could probably squeeze a 18 in there
