Thanks!
Do you typically run the same setups in 13.5 or make changes for the slight speed differences?
Originally Posted by
WIITA
Here's the setup I ran from the nationals. Mitch ran something very similar.
Altered ego chassis/xti rear pod and top plate(short/short)
5* front blocks with 2 shims forward
CRC Blacks cut to 40.3mm 1/2 dope
3.5mm RH
.50 front spring .5mm droop
.5* camber
Red center spring(new one)
30wt oil
2mm pod droop
41.3 rear tire
3.5mm ride height
CRC Graylow rear
Max width
20k in the tubes
.50 sides outboard just touching and tweaked
CRC r8c body