R/C Tech Forums - View Single Post - The Speed Passion Thread
Thread: The Speed Passion Thread
View Single Post
Old 01-28-2014, 10:00 AM
  #12380  
YoDog
Tech Master
iTrader: (28)
 
YoDog's Avatar
 
Join Date: Aug 2006
Location: Gilroy, Ca.
Posts: 1,999
Trader Rating: 28 (100%+)
Default
Originally Posted by Speedfreak391
I have a reventon pro 1.1 and I have run it in my car 3-4 times at my local track. The last time that I had it at the track it worked perfectly.But 2 nights ago I was getting ready to go to the track and all I have is reverse, or if I change the running mode to forward/brake I get no movement at all. I am running a 8.5 V3 motor that came s a package with the speed control.
I have tried to reflash or resend the settings to the esc with both the lcd programmer and my PC. and no change. Any help would be appreciated.
Make sure you didn't accidently change model number on your transmitter and then re-calibrate the ESC to your radio. If it calibrates normally, it should work. If it shows a problem while calibrating, you may have killed the forward mosfet pack. Double check all your soldering as well.
YoDog is offline  
Reply