Originally Posted by rc car guy

ok so i have another question this time reguarding weight distribution towards the rear of the car, in the slower corners of our track the right of the car turns faster than the left of the car, i have added weight to both sides of the car to balance it left to right and i have twenty grams towards the rear of the car on purpose, now l/r is 2grams off but the left rear tire is 30g heavier than the right rear tire, i have about 8 grams behind the motor i can add to the right side of the car, should i do this? also i have the esc mounted about halfway between the servo, and the motor moved all the way forward, to also try and balance the car on all 4 tires, do you think this is the problem? the camber, ride height, droop is set correctly, the tire wear is a bit un even, with the right side not have an inner ring, however the left side does not the ring of death for tires but its a wear sign