Originally Posted by
Madulla
I broke my servo (stripped gear) first run with the stock horn. I also run the larger RSD bumper. I put a large Kimbrough saver on and have the same lack of throw problem. I can only get 20 degrees, not the 27 I am looking for. I will have to do some more testing.
Also both cars at our club had extreme traction roll problems. I was running Kevin's setup, the other guy a completely different stock one. Any ideas to tame the extra steering with the car ?
Like I said in my previous post kevens set up has too much traction im running 1.0mm 3hole pistons 50front 45rear with a 15lbs spring all the way around I am running .25mm rear shims for the roll center and as for front im running .5mm less than kevins set up im also running jaco blues did you follow kevins set up 100%? I also lowered my camber links equally as much as possible also if you do this change your droop front to 2.0mm above ride height and rear 2.5mm above ride height