R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 01-06-2014, 01:32 AM
  #40258  
M7H
Tech Elite
 
M7H's Avatar
 
Join Date: Dec 2004
Location: The Netherlands
Posts: 2,198
Default

Originally Posted by DesertRat
NOOOOOOOOOO!!! Get that +10 out of there and put the zero (2-dot) back in, and that's still pretty aggressive for a 10.5 X12, I'm amazed it didn't burn up right off the bat. With the zero, you still have 37.5 degrees of timing, which is plenty for an LRP wind.
I would even try to do the 4 dot insert in, and give it the lowest amount of timing, 27.5 degrees it still is then, gear up a bit to get the topspeed you need.
The torque of the motor is still enough, but it stays really cool then, and this will give you still good performance at the end of a run!

I run my X20 this way and it's pretty fast!
M7H is offline