R/C Tech Forums - View Single Post - CRC Altered Ego set-ups
View Single Post
Old 01-03-2014, 05:39 AM
  #3  
sg1
Tech Elite
iTrader: (79)
 
sg1's Avatar
 
Join Date: Aug 2004
Location: Ohio
Posts: 3,262
Trader Rating: 79 (100%+)
Default

Front:

1.565" gray, 1/4" SXT inside
.45mm front springs, .5mm droop
5* blocks, 2 shims forward and 1 back
graphite high roll center, thicker ones.
barely 3/4* camber
1-.015" shim on axles (didn't try to widen front)
barely 3mm ride height at nose of chassis

Rear:

1.64" gray, full SXT
20k in 1 tube, 30k in other
35wt. center shock with new red spring
new .50mm taperd side springs, just touching
2mm droop
3.25mm ride height

Other info:

Power Push white lightening battery positioned forward
Team Scream (D3.5) motor, HT 12.5 rotor
CRC body (Mohawk)
SXT set just 5 minutes
Hobbywing 1s esc

Last edited by sg1; 01-03-2014 at 06:02 AM. Reason: Typo on front tire size!
sg1 is offline