Originally Posted by
joeymdz
What esc settings are you running and your EPA? That's allot of motor for a loose track if your settings are high
I'm running an 7.5 with the Orion at punch 3, throttle curve at -13%/75 (mt-4), steering rate at 80%
Agreed. if the track is very large and you need the top end, you can try to gear up and turn the EPA way down. it will actually soften the bottom end too but still get some top speed that way because of the gearing. or change to less motor. 6.5 is a lot of motor to run at full rip on anything less than pretty good traction. play with other ESC settings too. punch, boost, or any of that stuff.
I also agree on the diff oils. After going down to 5 and 3 I haven't wanted to change back to thicker oils. If I am running slicks on clay or on super high bite again, I probably will. But anything less than that and it just isn't as good.