Originally Posted by
quinnfrazier
i have a 6.1wc and was wondering what's a good track width to run F/R for 17.5 blinky and what's the best way to shim, at the arms or hexes thanks in advance
Shim at the arms to get the desired track width but you can use wheel shims to test and fine tune. In the front, use the offset blocks and add up to 1.5mm if needed. In the rear, use the offset blocks for the back mount and the standard block for the forward mount. You can add up to 1mm here as well.
When at all possible, shim the arms and use the wheel spacers only for a quick adjustment at a race event. IMO