R/C Tech Forums - View Single Post - *NEW* WILDFIRE D06 Touring Car from VBC RACING
Old 12-09-2013, 10:53 PM
  #518  
Korey Harbke
Tech Champion
iTrader: (13)
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,176
Trader Rating: 13 (100%+)
Default

I agree with Mark.

My modified setup from Timezone is actually a little closer to what I would run as a base setup. Check the setup sheet out:

http://cdn.shopify.com/s/files/1/016...300913.pdf?791

I would change the following though:

-Run the kit chassis
-Run 0.5mm under all the suspension mounts (take the antidive out I have in the setup sheet)
-Run position #4 on the rear shock tower instead of #3
-Use 2000wt oil to start in the rear diff
-Yes, run 3.5 deg rear toe in stock (C05/E30 blocks in the rear) I know it sounds crazy, but our car seems to like it. I had better transient response, turn in, rotation around the middle of the corner, and forward bite. Whenever I got my car working really well on 3 deg, I went to 3.5 just to see... and it was faster on 3.5 deg regardless of what class I was running.

This makes for a very neutral and easy to drive car.

-Korey
Korey Harbke is offline