Originally Posted by
SPACOLY
Hi guys
also has anyone eles a drama of the motor clicking (hesitating) when under very low throttle as if the battery is going flat.(when i re-adjust the motor and it will fix it for a little while) and im not jumping or hitting anything so i doubt the motor is moving as the motor mount screw is always tight with i adjust it
i run the hobbywing sct pro kit 4000kv and 120amp esc
Double Check:
1) Your ESC has the latest SCT Pro ESC Firmware
2) Sensor cable tight on all ends - and LED's indicating running in sensored mode. Check before running, and also a little while after running (as sometimes it falls into sensorless mode when the connection is loose, then it does not necessarily resume sensored mode)
P.S. You can also try the
Hobbywing thread for some help as well.