Originally Posted by
niemand
Hi,
its been a while, but i got around to testing on that track again.
I tried all sorts of things to get the rear end planted none succeeded, at last a new set of tires was the cure. Seems as if i got a bad set before
Now I've got a bit of an understeer problem especially mid corner.
Here's what I ended up with:
Everthing carpet base setup except for
Carbon stiffeners
Topdeck post
0mm front inner camber links
1mm rear inner camber links
2k diff oil
low diff and spool position
The track is high traction and really tight and the car is super easy to drive but just not fast enough because it lacks steering and therefore cornerspeed.
Suggestions would be highly appreciated. I already tried every possible inner camberlinkheigt combination which had only a small effect.
Maybe I'll try higher rear RC and harder rear antirollbar next time.
Also remind me what does armsweep do?
Regards,
David
arm sweep will help your situation as it gives more mid and exit,and with the slightly shorter wheel base it gives more turn in,use 0 ackerman shims with arm sweep to keep it the same as if you hadn,t i used a 0.5 center line to the inner on the fr,and +1 on the 1.3 rear roll bar,how much rear toe are you running,on high grip you shouldn't need much,2.5 maybe?
and i can highly recommend widening the rear by 0.5mm